Shown with ID and OD grinding on seals with multiple angles

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The ProGrind V is our five axis special parts machine.  It can do OD, contouring and end work on a variety of difficult to grind parts.  It is available with either a conventional or a direct drive high speed workhead.

Control:
Control system . ....... . . . . . . . .  Fanuc, 5 axis simultaneous
Display  . . . . . . . . .. . . . . . . . . . . . . . . . . . . .10" flat panel
Program increment . . . . . . . . . . . . . . . . . . . 000010"/.0001

Working dimensions:
Longitudinal Travel (X axis)  . . . . . . . . . . . . . . . . . . . . . 18"
Cross Travel (Y axis) . . . . . . . . . . . . . . . . . . . . . . . . . . 16"
Vertical Travel (Z axis) . . . . . . . . . . . . . . . . . . . . . . . 12.5"

Workhead:
Rotation speed -  .  . . . . .................. . . . . . . 0 -45 RPM
                                                             0-450 RPM Direct drive
Rotation - C axis . . . . . . .  . . . . . . . . . . . . .  200 degrees
Positioning  . . . . . . . . . . . . . . . . . . . . . . . . . . .  +/-  .001
Spindle . . . . . .. taper, drilled for chuck or center adapter

C Axis:
Rotation speed . . . .. . . . . . . . . . . . . . . . . . . 0-10 RPM
Rotation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200

Grinding spindle:
Grinding spindle continuous rating . . . . . . . . . . . . . 8 HP
Speed range - both directions  . . . .1,000 - 10,000 RPM

Positioning   . . . . . . .. . . . . . . . . . . . . . . . . . .  +/-  .001

Dimensions:
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  72"
Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  77"
Height  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   60"
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5,000 lbs.